Mbm-corporation iCREASE AIR Manuel d'utilisateur télécharger pdf (Page 23)

HEIGHT ADJUSTMENT CALIPER

The caliper setting is what ensures the feeding of one sheet and prevents the feeding of

double sheets. It is very important that this caliper be set correctly. To set the caliper

take one sheet of the stock you are running and slide it between the caliper and vacuum

wheel. Take a second sheet and slide it back and forth, in and out while lowering the

height adjustment until the second sheet cannot slide under the caliper. DO NOT

OVERTIGHTEN! It is very important that the sheet is not pinched in anyway.

There are 2 different calipers; the o-ring and the metal caliper. The metal caliper is

designed to work better with heavy stock and the o-ring caliper is designed to work with

lighter stocks. Use the o-ring caliper when running any multi-part forms.

Height Adjustment Knob

Caliper Disk Lock Knob

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 33 34

Pas de commentaire

Mbm-corporation iCREASE AIR Manuel d'utilisateur Page 23